|
FullTank Swing Automatic Gate Operator
|
The FullTank is the biggest automatic gate opener in our range. It
is a hydraulic operator designed for high duty cycle commercial, industrial
and residential electric driveway gates up to seven metres wide.
|
|
| |
|
|
240 VOLT HYDRAULIC GATE OPERATOR - COMMERCIAL / INDUSTRIAL
- 7.0 METRE LEAF |
Manufactured by SEA in Italy the FullTank is a 240 volt
swing gate hydraulic operator. The use of hydraulics in swing gate motors
has been around for many years with the motor, tank and pump all contained
within the housing. As with all things hydraulic gate operators come in
various levels of quality but given that hydraulics are essentially designed
for demanding sites our attitude is that they need to be the best and
no corners should be cut. To this end SEA is recognised as being in the
top two manufacturers in the world of hydraulic gate motors and maintains
high levels of quality by producing all vital components in house. Low
side room is a feature of this operator needing as little as 100mm. The
FULLTANK is a non reversible operator with key operated manual override.
The FULLTANK is suitable for gates to 7 metres wide and likes nothing
better than a high duty cycle.
It is possible to use a variety of control boards to control the FULLTANK
including the ATA CB6, K32R and the T2. The suggested board is the T2
which has thrust control to regulate the FULLTANK force and can be used
as a one or two motor controller. |
|
MOTOR ONLY - |
FULLTANK - Single operator with mounting brackets |
$1257.00 |
LOGIC CONTROL- |
LOGICKT2 - Logic control for one or two motors
with built in receiver |
$380.00 |
REMOTES - |
REMRIB - Four channel remote control transmitters |
$71.00 |
SINGLE GATE KIT - |
Kit with one FullTank motor, logic control, receiver and remote
control |
$1708.00 |
DOUBLE GATE KIT - |
Kit with two FullTank motors, logic control, receiver and remote
control |
$2965.00 |
|
|
