Automatic Gates Gold Coast

HOME | CONTACT | WARRANTY | DIY

GATES

AUTOMATION

HARDWARE

ACCESS

DRIVEWAY GATES

HINGED GATE MOTORS

HINGES

REMOTE CONTROLS

GATE HARDWARE

SLIDING GATE MOTORS

SLIDING WHEELS

ACCESS CONTROL

TELESCOPIC GATES

SOLAR POWERED KITS

SLIDING TRACKS

BOOM GATES

CANTILEVER GATES

AUTO ACCESSORIES

GATE STOPS

AUTOMATIC BOLLARDS

Call for an automatic gate quote 5527 3115

Gate Stops

A full range of gate hardware, including weld on stops, bolt down stops and centre stops. All automatic gates should have both opening and closing gate stops.

AUTOMATIC SWING GATE CENTRE STOP

Galvanised centre stop for double gates. Can be driven over without damage to tires or the stop. Front of plate 20mm high. Rear of plate 47mm high. Ideal gate to ground clearance 25mm.

CENTRESTOP - $13.30


Cast Stop

AUTOMATIC SWING GATE CAST CENTRE STOP

Cast centre stop for double gates. Can be driven over without damage to tires or the stop. Front of plate 23mm high. Rear of plate 56mm high. Ideal gate to ground clearance 25mm.

STOPCAST - $59.60


AUTOMATIC SWING GATE CENTRE STOP

Galvanised centre stop for double gates. Safe and strong this stop has a removable top with a fixing plate below which can be bolted to the ground or attach a leg and concrete in. Can be driven over without damage to tires or the stop. Front of plate 20mm high. Rear of plate 40mm high. Ideal gate to ground clearance 25mm.

STOPCENTRE - $38.20


CENTRE STOP PACKER

Galvanised centre stop packer - 10mm. Can be used as one or in multiples to build up the centre stop.

STOPCENTPCK - $18.10


BOLT DOWN STOP FOR AUTOMATIC GATES

Bolt down galvanised stop with rubber stopper. Ideal for swing gate opening stops or sliding gate stops. 90mm x90mm base with 135mm high.

STOPBOLT - $14.30


Spring Stop

BOLT DOWN STOP WITH SPRING TENSION RELEASE

Galvanised bolt down stop for sliding gates with inbuilt spring to take up the end tension and allow easy release.

SPRINGSTOP - $86.40


RUBBER SWING GATE CENTRE STOP

Automatic gate centre stop made from durable tough rubber.

RUBBERSTOP - $19.00


GATE RECEIVER

GATE RECEIVERS

Weld on or bolt on receiver for sliding gates to suit 50mm thick gates.
Also available side fix bracket for fixing to brick piers, walls etc. Has height and position adjustment when attaching the gate receiver.

Also available in our cantilever range are receivers to suit gates 75mm, 100mm and 135mm.

RECGATE50 - $15.20 Suitable for gates 50mm thick
CANRECLGT - $20.60 Suitable for gates 70mm thick
CANRECMED - $51.80 Suitable for gates 80mm thick
CANRECLGE - $58.30 Suitable for gates 120mm thick


Adjustable Receiver

ADJUSTABLE GATE RECEIVER

Weld on or bolt on receiver for sliding gates to suit gates from 75mm to 150mm thick. Includes side fix bracket for fixing to brick piers, walls etc. Has height and position adjustment when attaching the gate receiver.

RECADJUSTABLE - $83.10 Suitable for gates 75mm to 150mm thick

Click here for drawing and dimensions.


GATE RECEIVER MOUNTING BRACKET

GATE RECEIVER MOUNTING BRACKET

Fixing bracket for attaching to brick piers, walls etc. Has height and position adjustment when attaching the gate receiver.

RECBRACKET - $24.40

HOME  - DIY  - CONTACT

61 Lawerence Drive Nerang QLD 4211 Phone 5527 3115